Z Motorcycle. Service Manual. All rights reserved. No parts of this publication may be reproduced, stored in a retrieval system, 25, (K) To protect the environment in which we all live, Kawasaki has incorporated crankcase emis-. top > Search for Owner’s Manual (Motorcycle). How to use this service. , , , , , , , , , , , , , . KAWASAKI Z REPAIR MANUAL DOWNLOAD This is the COMPLETE factory service workshop repair manual printed for the KAWASAKI Z
|Published (Last):||11 March 2012|
|PDF File Size:||7.19 Mb|
|ePub File Size:||4.92 Mb|
|Price:||Free* [*Free Regsitration Required]|
Apply silicone sealant to the alternator lead grommet and crankcase halves mating surface [A] on the front and rear sides of the cover mount. Clean spark plug and adjust plug gap see chapter Spark plug dirty, broken or maladjusted Spark plug cap trouble Inspect stick coil see chapter Don’t have an account? Replace the caliper if the cylinder and piston are badly scores or rusty.
Torque – Rear Engine Bracket Bolts: Throttle Sensor Setting Adapter: Service Code 51, 52, 53, 54 A.
Owner’s Manuals & Service Manuals | Kawasaki Vehicles
Torque – Rocker Arm Bolt: If the thickness of a shift fork ear is less than the service limit, the shift fork must be replaced. Sealant – Kawasaki Bond Silicone Sealant: Overall height 1 mm Torque – Windshield Ownrs If it is damaged, replace it. The push rod does not return to its original position once it moves out to take up camshaft chain slack. Got it, continue to print.
Rating of Bulb [A]: ECU Fuse 15A f. Download Now Similar manuals: When removing the tensioner, do not take out the mounting bolts only halfway. Ignition Fuse 10 A f. Steering Stem Bearing Driver: Pump the brake lever until it becomes hard, and apply the brake and hold it [A]. Pull the bulb out to prevent damage to the bulb. If the fluid level is lower than the lower level line, fill the reservoir to the upper level line [C] in the reservoir.
Torque – Steering Stem Head Bolt: The front wheel kawaxaki swing fully left and right from the force of gravity until the fork hits the stop.
Kawasaki Z1000 Service Manual
The rods are identical. Camshaft Oil Manaul 2. Apply the oil to the O-rings so that the O-rings will be coated with oil. Service Code 51, 52, 53, 54 Stick Coil 1: Environment when problem occurred.
Suspend an ac- curate thermometer [B] in the water so that the heat sen- sitive portions [C] are located in almost the same depth. Starter Motor Clutch Assembly. Inlet air pressure sensor Fork inner tube outside diameter 41 mm 1.
Download Kawasaki Z — Owner’s Manual PDF – Pages
Front axle clamp bolt Front axle Rear axle nut Final Drive: Production model years and Joint Connector A 7. Such a shock to their parts can damage them. Download Model Information – Kawasaki Ro- tate the crankshaft to positive direction clockwise viewed from output side. Make sure the area is well-ventilated and free from any source of flame or sparks; this includes any appliance with a pilot light.
CAUTION Do not disconnect the battery cables or any other electrical connections when the ignition switch is on, or while the engine is running. To facilitate actual operations, notes, illustra- tions, photographs, cautions, kawaaski detailed descriptions have been included in each chapter wherever necessary.
Torque – Water Pump Impeller Bolt: Never reuse old brake fluid. The subthrottle valve is built in the each throttle body.
This valve seat cutter is developed to grind the valve for repair. Joint Connector B Chain slack – – – Wheelbase 1 mm Air in the brake line Handlebar hard to turn: Water Temperature Sen- 2.
kawasaki z1000 repair manual 2003-2007 download – CarFSM.com
If the connector is clogged with mud or dust, blow it off with compressed air. Cylinder Head Jacket WARNING Do not attempt to drive the motorcycle until a full brake pedal is obtained by pumping the brake pedal until the pads are against the disc.
Place a strip on each journal parallel to the camshaft installed in the correct position.